International Shipping
Orders destined for delivery outside of the United States are generally sent fully insured by USPS First Class Mail using the "Reverb Safe Shipping" system. Please click here to be informed about our policies, limitations and expected delivery time on international shipping prior to placing an order. Due to continued issues with lost packages and failed deliveries, we no longer accept orders destined for Italy, Mexico or Brazil, without exception.
|
|
|
Control Knobs For Vox Amplifiers and Guitars
|
Genuine and Original Thomas Vox (US) Chrome Plated Control Knob - These control knobs were removed from Thomas Vox amplifiers that I purchased to "part out." I have hand polished each knob to enhance the luster of the chrome plating. Includes a set screw to fasten to the control shaft. The set screw supplied with these knobs might either be slotted or a hex head, based on our inventory and our discretion. These are not reproductions, they are the real deal. As these knobs are used and more than fifty years old, they may exhibit some patina, wear, minor nicks or cloudiness in the chrome. Offered "as-is" without a return privilege.
|
NCM-023
"Press On" Type Black ABS Pointer Knobs
For Split Shaft Splined Control Shafts (shown below)
|
Genuine Vox "Chicken Head" Black Plastic Control Knob - Set of Two - These are the "press on" style chicken head knobs used on the modern production of Vox amps. These knobs are for "split-shaft, splined" control pots. As these knobs do not have set screws, they are not suited for standard 1/4" control shafts. Please look at the picture at lower left that shows the type of split shaft these knobs require. These knobs do not fit vintage Vox amps unless the amp has a knurled control shaft, as shown at left.
Price: $13.99 USD for two knobs
US Shipping: Free
Part #: NCM-023
|
NCM-345 (two views)
|
JMI Style Voltage Selector Knob (cap only) - A rotary voltage selector switch was common on JMI Vox amps from the 1960s. Unfortunately, these voltage selector switches have not withstood the test of time. Many of these switches have broken, often losing their selector knob totally. To add to the complication, such voltage selector switches have been made illegal in many countries, so a reproduction of the switch asssembly is not very likely these days.
North Coast Music is providing an effective solution to this problem. Have your tech "hard wire" your amp to the desired AC voltage for your country, then have your tech remove the broken voltage selector switch and replace it with one of these reproduction voltage selector knobs. This will require the fabrication of a small piece of aluminum for the underside of the chassis to support and fasten the voltage selector knob. Although the knob will be non functional, your amp will retain its stock appearance.
Size of JMI Style Voltage Selector Knob (cap only): ~1" diameter and ~5/16" tall. The access hole for this knob in an JMI Vox chassis is ~1.125".
Price: $19.99 USD each
US Shipping: Free
Part #: NCM-345
|
VOX Covers | VOX Hardware Spares
VOX Logos | Vox Grill | Hofner Spares | Marshall Spares
Park Amp Spares | Closeouts
Contact Us | About Us | The VOX Showroom
Sonic Loudspeaker Legacy Website
North Coast Music
"Who else could it be for Vox parts?
Cudahy WI 53110
URL: /www.northcoastmusic.com
VOX is a registered trademark of VOX Amplification, Milton Keynes UK.
Hofner is a registered trademark of Hofner, Hagenau Germany.
Marshall is a registered trademark of Marshall Amplification plc, Milton Keynes UK
© 1996-2024 North Coast Music. All rights reserved.
|
| | |
